Print Page

Font Size:
ผลิตภัณฑ์เครือข่าย

Programmable Controllers
เครือข่าย MELSEC
เครือข่าย MELSEC - การเริ่มต้นปฏิวัติอุตสาหกรรมของเครือข่าย
MELSEC ตอบสนองความต้องการใหม่ๆ ของเครือข่ายอุตสาหกรรม และเพิ่มประสิทธิภาพทั้งระบบโดยการจัดหาบริการที่จำเป็นในโรงงานผลิต เช่น การควบคุมความเร็วสูง, การควบคุมข้อมูลจำนวนมาก, การเดินสายที่มีความยืดหยุ่น, การเริ่มต้นระบบและการบำรุงรักษาพื้นฐาน


ข้อมูลทั่วไป

Network Features
Seamless communication between upper-level information systems and lower-level field systems!
Choose the optimal network to meet your needs


CC-Link IE TSN supports TCP/IP communications and applies it to industrial architectures through its support of TSN enabling real-time communications. With its flexible system architecture and extensive setup and troubleshooting features make CC-Link IE TSN ideal for building an IIoT infrastructure across the manufacturing enterprise.


*TSN: Time Sensitive Networking
*IIoT: Industrial Internet of Things




A high-speed and large capacity Ethernet-based integrated open network that supports a mixed environment comprised of control data and the administration data of equipment. Seamless connection is possible for the distributed control of controllers, I/O control, motion control and safety control.


An open field network that can be used with an ample range of partner products, numbering in excess of 1,000 models, from wire saving units to safety equipment.

รายการผลิตภัณฑ์

CC-Link IE Controller Network
เครือข่ายเชื่อมต่อระหว่างตัวควบคุม ที่สามารถสื่อสารความเร็วสูงและข้อมูลจำนวนมากโดยราบรื่นและไม่มีสัญญาณรบกวน



CC-Link IE Field Network
เครือข่ายฟิลด์ความเร็วสูงขยายจากการควบคุม I/O ไปยังการควบคุมที่แยกสาขาจากตัวควบคุม และทำให้การเดินสายไฟตรงกับเลย์เอาท์ของอุปกรณ์

 


CC-Link
เครือข่ายฟิลด์ความเร็วสูงมีความสามารถในการควบคุมและใช้งานข้อมูล



CC-Link Safety
เครือข่ายฟิลด์ความปลอดภัยนี้สร้างระบบรักษาความปลอดภัยเพื่อปกป้องโรงงานผลิตจากอันตรายต่างๆ



CC-Link/LT
เครือข่ายที่ลดการเดินสายภายในและภายนอกเพื่อขจัดปัญหาภายในสถานที่ เช่น งานเดินสายที่ซับซ้อนเกินไป หรือข้อผิดพลาดในการเดินสาย

 


Ethernet
เครือข่ายที่มีคุณภาพดีเยี่ยมนี้จะเชื่อมต่อกับแผนกต่างๆ ทั่วทั้งโรงงาน

 


AnyWire
เครือข่ายเซ็นเซอร์แบบยืดหยุ่นนี้ใช้สายยูนิเวอร์แซลและสายเคเบิลโรบอทเพื่อให้สามารถควบคุมเซ็นเซอร์และตัวสั่งเริ่มการทำงานที่แยกสาขาออกไป

 


SSCNET
การเดินสายเครือข่าย Motion Controller กับ Servo ที่ใช้สายใยแก้วนำแสงความเร็วสูงได้ในระยะทางไกล

 

MELSECNET/H
เครือข่ายการควบคุมสำหรับการเชื่อมต่ออุปกรณ์การผลิต

  


MODBUS
โมดูล MODBUS สำหรับการเชื่อมต่อกับอุปกรณ์ที่รองรับ MODBUS เช่น เครื่องมือการวัดและตัวควบคุมอุณหภูมิ

  


PROFIBUS
โมดูลอินเทอร์เฟซสำหรับเครือข่าย PROFIBUS

  


DeviceNet
โมดูลอินเทอร์เฟซสำหรับเครือข่าย DeviceNet

 

Serial Communication
โมดูลการสื่อสารที่สามารถรวบรวม แก้ไข ตรวจสอบและควบคุมข้อมูล PLC และรวบรวมข้อมูลการวัดค่าจากอุปกรณ์อื่นๆ



FL-net(OPCN-2)
โมดูลอินเทอร์เฟซสามารถเชื่อมต่อกับเครือข่าย FL-net

 

ข้อมูลจำเพาะ

CC-Link IE Field Network performance specifications

ItemMELSEC iQ-R
Series
R04ENCPU
R08ENCPU
R16ENCPU
R32ENCPU
R120ENCPU
RJ71EN71
MELSEC iQ-R Series
master/local
module
RJ71GF11-T2
MELSEC-Q
Series
master/local
module
QJ71GF11-T2
MELSEC-L
Series
master/local
module
LJ71GF11-T2
Network interface
board
Q80BD-J71GF11-T2,
Q81BD-J71GF11-T2
Communication speed1 Gbps
Maximum stations per network121 stations (1 master station. 120 slave stations)
Connection cableEthernet cable (Category 5e or higher, double shielded/STP), straight cable
Overall cable distanceLine type: 12,000 m (When 1 master station and 120 slave stations are connected)
Star type: Depends on system configuration*1
Ring type: 12,100 m (When 1 master station and 120 slave stations are connected)
Maximum station-to-station distance100 m
Maximum number of networks239
Network topologyLine type, star type*2, ring type
Communication methodToken-pass
Maximum link points per network*3
RX16384 points, 2K bytes
RY16384 points, 2K bytes
RWr8192 points, 16K bytes
RWw8192 points, 16K bytes
Maximum link points per station*3
Master stationRX16384 points, 2K bytes
RY16384 points, 2K bytes
RWr8192 points, 16K bytes
RWw8192 points, 16K bytes
Local station*4RX2048 points, 256 bytes
RY2048 points, 256 bytes
RWr1024 points, 2048 bytes256 points,
512 bytes
RWw1024 points, 2048 bytes256 points,
512 bytes
Intelligent device stationRX2048 points, 256 bytes
RY2048 points, 256 bytes
RWr1024 points, 2048 bytes256 points,
512 bytes
RWw1024 points, 2048 bytes256 points,
512 bytes
Remote device stationRX128 points, 16 bytes
RY128 points, 16 bytes
RWr64 points, 128 bytes
RWw64 points, 128 bytes
Safety communications
Maximum number of safety connections per network1814
connections
Maximum number of safety connections per station120
connections
Maximum number of link points per safety connection8 words
(input: 8 words, output: 8 words)
Transient transmission capacity
Transient transmission capacity1920 bytes maximum

ItemMELSEC iQ-R Series
simple motion module
RD77GF4
RD77GF8
RD77GF16
RD77GF32
MELSEC-Q Series
simple motion module
QD77GF4
QD77GF8
QD77GF16
Communication speed1 Gbps
Maximum stations per network121 stations (1 master station. 120 slave stations)
Connection cableEthernet cable (Category 5e or higher, double shielded/STP), straight cable
Overall cable distanceLine type: 12,000 m (When 1 master station and 120 slave stations are connected)
Star type: Depends on system configuration*1
Maximum station-to-station distance100 m
Maximum number of networks239
Network topologyLine type, star type*2
Communication methodToken-pass
Maximum link points per network*3
RX16384 points, 2K bytes8192 points, 1K bytes
RY16384 points, 2K bytes8192 points, 1K bytes
RWr8192 points, 16K bytes1024 points, 2K bytes
RWw8192 points, 16K bytes1024 points, 2K bytes
Maximum link points per station*3
Master stationRX16384 points, 2K bytes8192 points, 1K bytes
RY16384 points, 2K bytes8192 points, 1K bytes
RWr8192 points, 16K bytes1024 points, 2K bytes
RWw8192 points, 16K bytes1024 points, 2K bytes
Local station*4RX2048 points, 256 bytes
RY2048 points, 256 bytes
RWr256 points, 512 bytes
RWw256 points, 512 bytes
Intelligent device stationRX2048 points, 256 bytes
RY2048 points, 256 bytes
RWr256 points, 512 bytes1024 points, 2048 bytes
RWw256 points, 512 bytes1024 points, 2048 bytes
Remote device stationRX128 points, 16 bytes
RY128 points, 16 bytes
RWr64 points, 128 bytes
RWw64 points, 128 bytes
Safety communications
Maximum number of safety connections per network
Maximum number of safety connections per station
Maximum number of link points per safety connection
Transient transmission capacity
Transient transmission capacity1920 bytes maximum

*1: A hub is required to use the star type wiring. Up to 20 hubs can be connected.

*2: Line and star types can also be mixed.

*3: Remote input RX: Bit data input from a slave station to the master station
Remote output RY: Bit data output from the master station to a slave station
Remote register RWr: 16-bit (word) unit data output from the master station to a slave station
Remote register RWw: 16-bit (word) unit data output from the master station to a slave station
*: May partially differ for local stations

*4: Number of link points allocated by the master station. A local station can also use other link points to receive data from other stations.

For further details, please refer to the relevant product manuals.

CC-Link IE Control Network performance specifications

ItemMELSEC iQ-R Series
R04ENCPU
R08ENCPU
R16ENCPU
R32ENCPU
R120ENCPU
RJ71EN71
MELSEC iQ-R Series
RJ71GP21-SX
MELSEC-Q Series
QJ71GP21-SX
QJ71GP21S-SX
Network interface board
Q80BD-J71GP21-SX
Q80BD-J71GP21S-SX
Q81BD-J71GP21-SX
Q81BD-J71GP21S-SX
Communication speed1 Gbps
Maximum stations per network120 (1 control station, 119 normal stations)*5
Connection cableEthernet cable
(Category 5e or higher,
double shielded/STP),
straight cable
Multi-mode optical cable
Laser class (JIS C 6802, IEC 60825-1)Class 1 laser product
Overall cable distanceLine type: 11,900 m*6
Star type: Depends on system configuration
Ring type: 12,000 m*6
66,000 m*6
Maximum station-to-station distance100 m550 m
Maximum number of networks239
Maximum number of groups32
Network topologyLine type, star type*7,
ring type
Duplex loop ring
Communication methodToken-passToken-ring
Maximum link points per network*8
LB32768 points, 4K bytes32768 points, 4K bytes*9
LW131072 points, 256K bytes131072 points, 256K bytes*10
LX8192 points, 1K bytes
LY8192 points, 1K bytes
Communication speed*8 (Regular mode)
LB16384 points, 2K bytes
LW16384 points, 32K bytes
LX8192 points, 1K bytes
LY8192 points, 1K bytes
Communication speed*8 (Extended mode*11)
LB32768 points, 4K bytes
LW131072 points, 256K bytes
LX8192 points, 1K bytes
LY8192 points, 1K bytes
Transient transmission capacity
Transient transmission capacity1920 bytes maximum

*5: Under CC-Link IE Control Network, the number of connectable normal stations per network differs by the CPU module used in the control station.
For the details, please refer to the manual of the module used in the control station.

*6: When 120 stations are connected.

*7: Line and star types can also be mixed.

*8: Link relay LB: Bit data transmitted from stations in the network.
Link register LW: 16-bit (word) unit data transmitted from stations in the network.
Link input LX: Data input from a station to the I/O master in the same block.
Link output LY: Data output from the I/O master station to another station in the same block.

*9: 16384 points and 2K bytes for the basic model QCPU and the MELSEC-QS Series Safety CPU.

*10: 16384 points and 32K bytes for the basic model QCPU and the MELSEC-QS Series Safety CPU.

*11: To use the extended mode, all the stations must be compatible with the extended mode.

CC-Link IE Field Network Basic performance specifications

ItemMELSEC iQ-R SeriesMELSEC-Q SeriesMELSEC-L SeriesMELSEC iQ-F Series
R□CPU
R□ENCPU
Q□UDVCPUL□CPUFX5U
FX5UC
Communication speed100 Mbps
Maximum stations per network*1264 stations (16 stations × 4 groups)16 stations6 stations
Connection cableEthernet standard compatible cable, Category 5e or higher (STP cable)
Maximum station-to-station distance100 m (between a hub and node)*13
Network topologyStar type
Communication methodUDP
Maximum link points per network*14
RX4096 points1024 points384 points
RY4096 points1024 points384 points
RWr2048 points512 points192 points
RWw2048 points512 points192 points
Maximum link points per station*14
Master stationRX4096 points1024 points384 points
RY4096 points1024 points384 points
RWr2048 points512 points192 points
RWw2048 points512 points192 points
Slave station*15RX64 points; up to 256 points can be allocated according to the number of stations
RY64 points; up to 256 points can be allocated according to the number of stations
RWr32 points; up to 128 points can be allocated according to the number of stations
RWw32 points; up to 128 points can be allocated according to the number of stations

*12: Maximum number of slave stations controlled by the master station, depending on the number of allocated slave stations. The total number of allocated stations should not exceed the maximum number of slave stations.

*13: The maximum distance between stations depends on the actual hub used. Please refer to the hub manufacturer's specifications.

*14: Remote input RX: Bit data input from a slave station to the master station
Remote output RY: Bit data output from the master station to a slave station
Remote register RWr: 16-bit (word) unit data output from the master station to a slave station
Remote register RWw: 16-bit (word) unit data output from the master station to a slave station

*15: Number of link points allocated by the master station.


Network specifications comparison

Control level

ItemCC-Link IE Control NetworkMELSECNET/H
Optical duplex loopTwisted pairOptical loop methodCoaxial bus methodTwisted bus method
Communication speed [bps]1 G25 M10 M10 M (max.)
Maximum stations per network120*16653332
Maximum link points
Per network128K*1716K*17
Per station128K*1716K*17
Distance
Overall [km]6612*18302.5*190.1 (10 Mbps)
Station-to-station [m]5501001000500100 (10 Mbps)
Communication
Network topologyDuplex loop ringStar type, line type, ring typeDuplex loop ringBus typeBus type
Connection cableEthernet cable (Multi-mode optical fiber)Ethernet cable (Category 5e or higher, double shielded/STP)Optical fiber cableCoaxial cableTwisted pair cable

Field level

ItemCC-Link IE Field NetworkCC-Link IE Field Network BasicCC-Link
Communication speed [bps]1 G100 M10 M (max.)
Maximum stations per network12165*2065*20
Maximum link points
Per network16K*214K*214K*21
Per station2K*21256*21 (When 4 stations are occupied)256*21 (When 4 stations are occupied)
Distance
Overall [km]12.1*18Depends on system configuration1.1*19 (10 Mbps)
Station-to-station [m]100100100 (10 Mbps)
Communication
Network topologyStar type, line type, ring typeStar typeBus type, T-branch type, star type
Connection cableEthernet cable (Category 5e or higher, double shielded/STP)Ethernet cable (Satisfies 100BASE-TX)Twisted pair cable (CC-Link dedicated cable)

*16: Value when the extended mode is used.

*17: Value of link register LW (word).

*18: Value when ring connection is used.

*19: Value when a repeater is used.

*20: The maximum stations per network differ according to programmable controller Series.

*21: Value of remote register Rwr + RWw (word).


Cable specifications

CC-Link IE compatible twisted-pair cable*22

ItemSpecifications
Twisted-pair cable specifications Category 5e or higher, (double shielded/STP) straight cable
StandardCables that conform to the following standards.
・ IEEE802.3 (1000BASE-T)
・ ANSI/TIA/EIA-568-B (Category 5e)
Connector specificationsStandardRJ45 connector with shield

CC-Link IE compatible optical cable*22

ItemSpecifications
Optical cable specifications 1000BASE-SX (MMF) optical cable
StandardIEC 60793-2-10 Types A1a.1 (50/125 µm multimode)
Transmission loss (max.)≤ 3.5 dB/km (λ = 850 nm)
Transmission band (min.)≥ 500 MHz・km (λ = 850 nm)
Connector specifications Duplex LC connector
StandardIEC 61754-20: Type LC connector
Connection loss≤ 0.3 dB
Polished facePC (Physical Contact) polishing

*22: For recommended cables and other information, contact the CC-Link Partner Association.

CC-Link IE Field Network Basic compatible twisted-pair cable

ItemSpecifications
Twisted-pair specifications Category 5e or higher, (STP) straight cable
Category 5 or 5e, (STP) cross cable
StandardCables that satisfy following standards
・ IEEE802.3 (100BASE-TX)
・ ANSI/TIA/EIA-568-B (Category 5)
Connector specificationsStandardRJ45


Network Topologies*23

*23: CC-Link IE Field Network Basic supports star topology only.


Cyclic transmission

In    cyclic transmission, data is transmitted periodically using link devices. Under CC-Link IE Field and Control networks, some differences exist as described in this section.

CC-Link IE Field Network*24
One-to-one communication is possible between the master and slave stations. The status of link devices (RY, RWw) within the master station are transmitted to an external device connected to a slave station. Likewise, the status of external devices is transmitted to the master station link devices (RX, RWr) via the slave station.

In the case of local stations, the status of the master station link devices (RY, RWw) is relayed to all local station link devices (RX, RWr) on the network. When an input from a slave or local station is executed, the slave station link devices (RX, RWr) status and local station link devices (RY, RWw) status are stored in the master station link device (RX, RWr), along with other local station link devices (RY, RWw). As a result, all local stations possess the data of other slave stations, similar to the master station.

*24: The data is transmitted in the same method on CC-Link IE Field Network Basic. Note that communication is made between the master station and the slave stations only. No local stations are available on the CC-Link IE Field Basic.



Output from the master station

① In the master station, devices of the CPU module turn ON.

② In the master station, the status of the CPU module devices are stored in the link devices (RY, RWw) by link refresh.

③ The status of the master station link devices (RY, RWw) are then stored in the slave station link devices (RY, RWw), and in the local station link devices (RX, RWr) by link scan.

④ The status of the local station link devices (RX, RWr) are stored in the CPU module devices.

Input from the slave or local station

⑤ In the local station, devices of the CPU module turn ON.

⑥ In the local station, the status of the CPU module devices are stored in its own station link devices (RY, RWw) transmission area.

⑦ The status of the slave station link devices (RX, RWr), and the local station link devices (RY, RWw) are stored in the master station link devices (RX, RWr) by link scan.

⑧ The status of the master station link devices (RX, RWr) are stored in the CPU module devices by link refresh.


CC-Link IE Control Network

Communications using link relays (LB) and link registers (LW)

This function allows each station to write data to its own send range of a link device (LB, LW) to send them to all other stations on the network. The status data of the control station link devices (LB, LW) are stored in the link devices (LB, LW) of each normal station. Likewise, the status of the normal station link devices (LB, LW) is stored in link devices (LB, LW) of the control and other normal stations.





① In the transmitting station, the CPU module devices turn ON.

② In the transmitting station, the CPU module devices status are stored in the link devices (LB, LW) of the CC-Link IE Control Network supporting module by link refresh.

③ The status of the link devices (LB, LW) in the transmitting station are sent to the link devices (LB, LW) of the CC-Link IE Control Network supporting module in the receiving station by link scan.

④ In the receiving station, the status of the link devices (LB, LW) are stored in the CPU module devices.

Transmissions using link inputs (LX) and link outputs (LY)

An I/O master station, which controls link inputs (LX) and link outputs (LY), and another station make one to one communication. LX is the input data transmitted between stations in a block, and LY is the output data transmitted from the I/O master station in a block. The control or normal station can be an I/O master station, and up to two I/O master stations (block 1 and block 2) can be used per network.



โปรแกรมเลือกรุ่น

Network related products selection tool