Product Features
Features
Connection with various drive products
Not only rotary servo motors but also linear servo motors, direct drive motors, FR-A800 series inverters, and products of Mitsubishi Electric servo system partners are connectable.
(Note-1): When using a partner product or the inverter FR-A800, use one whose version supports the Simple Motion module.
The Simple Motion Module Opens up Many Possibilities for Higher Performance
High-speed Synchronous Network SSCNETIII/H
Positioning Control
Positioning control is easily performed with a sequence program starting positioning data of a point table. To respond to extensive applications, various positioning controls are available: Linear interpolation, 2-axis circular interpolation, fixed-pitch feed, and continuous trajectory controls, etc.
Synchronous/Cam controls
Advanced synchronous control
The advanced synchronous control is the software-based control that can be used as an alternative to mechanical control such as gear, shaft, clutch, speed change gear, and cam.
The settings are easily made with parameters on MELSOFT GX Works3. In addition, the output axes for the synchronous control are operated with a cam.
[Command generation axis]
Command generation axis is the axis that performs only the command generation.
It is controlled independently of other axes connected to servo amplifiers. (not counted as a control axis)
Cam auto-generation
Cams for rotary knife can be generated automatically.
An ideal cam data can be created just by registering sheet length, synchronous width, and cam resolution to the specified device memory on GOT screen.
Mark Detection Function
The actual position of the servo motor can be obtained based on the inputs from the sensor that detects the registration marks printed on the highspeed moving film. By compensating the cutter axis position errors based on those inputs from the sensor, the film can be cut at the set position.
Engineering Environment
Easy point-and-click programming architecture MELSOFT GX Works3
This software supports the whole product development cycle - creation, startup, debugging and maintenance of sequence programs, parameters, positioning/cam data.
Functions List
Simple Motion Module | ||
---|---|---|
FX5-80SSC-S | FX5-40SSC-S | |
Number of control axes | Up to 8 axes | Up to 4 axes |
Servo amplifier connection method | SSCNETIII/H (150Mbps) | |
Maximum distance between stations [m(ft.)] | 100 (328.08) | |
Connectable servo amplifier | MR-JE-B/MR-J4-B(-RJ), MR-J4W-B | |
Operation cycle[ms] | 0.888, 1.777ms | |
Engineering Environment | MELSOFT GX Works3 (Simple Motion module setting function) | |
Control modes | Positioning control, Position control, Speed control, Torque control, Speed-torque control, Cam control, Advanced synchronous control, Linear interpolation (up to 4 axes), Circular interpolation (2 axes), Trajectory control, Speed-position switching control (ABS/INC), Position-speed switching control (INC) | |
Control unit | mm, inch, degree, pulse | |
Number of positioning data | 600 data (positioning data No. 1 to 600)/axis | |
Acceleration/deceleration process | Trapezoidal acceleration/deceleration, S-curve acceleration/deceleration | |
Manual control | JOG operation, Manual pulse generator operation, Inching operation | |
Functions that change control details | Current value change, Target position change function, Torque change function, Speed change function, Override function, Acceleration/deceleration time change function | |
Home position return method | Proximity dog method, Count method 1, Count method 2, Data set method, Scale home position signal detection method, Driver home position return (Note-1) | |
Auxiliary functions | Forced stop function, Hardware stroke limit function, Software stroke limit function, Absolute position system, Amplifier-less operation function, Unlimited length feed, Optional data monitor function, Mark detection function, Flash ROM backup, M-code output function, Digital oscilloscope function, Cam auto-generation function | |
Number of I/O occupying points | 8 points | |
24VDC internal current consumption [A] | 0.25 | |
Mass [kg] | 0.30 |
(Note-1): The home position return method set in a driver (a servo amplifier) is used.